A Longitudinal Digital Twin of the Implant–Bone–Prosthesis System: A Bayesian Data-Assimilation Architecture for Updating Complication Predictions at Recall Visits, With a Protocol for Validation
- Paper type
- Computational architecture with prediction model development and validation protocol
- Status
- Original Work · Working Paper
Contents
Abstract
Background. Implant patients are followed for years, and each recall yields radiographs, probing measurements, occlusal records, and prosthetic findings. These data are read against the previous visit and are not combined into a forecast. Risk tools and prediction models for implant complications use information fixed at baseline. The term digital twin has entered dentistry, but a recent scoping review found seven studies, mostly conceptual or prototype work with small samples and limited validation, and the one implant-specific system identified is a planning aid that is not updated after placement. A twin in the sense used in engineering and medicine is updated with data from its physical counterpart and predicts its future state.
Objective. To specify an architecture in which a patient-specific model of the implant, bone, and prosthesis is updated at each recall by Bayesian data assimilation and returns probabilities of biological and technical complications with stated uncertainty, and to set out how it would be developed and validated.
Framework. A state-space model couples a reduced-order mechanical model, a bone adaptation model, and hazard models for biological and technical events. Observations enter through measurement models with explicit error. A model-discrepancy term absorbs what the mechanistic model cannot explain. Population-level priors are learned hierarchically, and each patient’s posterior is updated sequentially.
Proposed methods. Synthetic experiments test identifiability. A retrospective cohort is used for development. Temporal and external validation compare the twin with a static model and with a statistical dynamic model for discrimination, calibration, interval coverage, and net benefit.
Central hypothesis. Sequential updating yields better-calibrated predictions than a baseline-only model, and the mechanistic component adds predictive value beyond a purely statistical dynamic model.
Conclusions. A worked example with assumed measurement error indicates that individual bone-loss rates are barely distinguishable from the population prior until four or five annual radiographs are available, which limits early personalization. Nothing has been implemented, and no patient data have been analyzed.
Keywords: digital twin; dental implant; Bayesian updating; data assimilation; marginal bone loss; prediction model; uncertainty quantification; finite element analysis
1. Introduction
An implant restoration is observed more often and for longer than most medical devices. Patients return once or twice a year, and at each visit the clinician records probing depths and bleeding, takes radiographs at intervals, checks the occlusion, and notes any loosening, chipping, or fracture. The record that accumulates is longitudinal and multimodal. Its use is largely comparative: this year’s radiograph is set beside last year’s, and a judgment is made.
Formal prediction in implant dentistry has taken a different route. Risk assessment tools combine a small number of patient and site characteristics into a risk profile [1]. Statistical and machine-learning models predict implant outcomes or peri-implantitis from baseline variables [2, 3]; a scoping review of artificial intelligence for implant prognosis found twelve eligible studies [4]. Such models produce one prediction at one time. They do not change when the patient’s own course shows that the prediction was wrong.
Engineering offers another approach. A digital twin is a virtual representation of a specific physical system that is updated with data from that system, predicts its behavior, and informs decisions about it [5]. The idea has been developed for aircraft and other structures [6, 7] and proposed for cardiology and other fields of medicine [8–11]. Reviews of digital dentistry now use the term [12, 13]. What has been built under that name in dentistry is much more limited. A scoping review covering publications to April 2025 screened 5,989 records and included seven studies; most were conceptual or prototype systems with small samples and limited clinical validation [14]. The implant-related example is a parametric reduced-order model that evaluates stress for a planned implant position in real time within planning software [15]. It is a fast simulator for a decision made once. It is not updated by what happens to the patient afterward.
The distinction is important. A patient-specific model that is never corrected by observation is a personalized simulation. The defining property of a twin is the loop from the physical system back to the model. This manuscript specifies such a loop for the implant–bone–prosthesis system. It proposes a Bayesian data-assimilation architecture in which each recall visit updates the state of a patient-specific model and the predictions derived from it, and it describes how the architecture would be developed, verified, and validated. It also examines what such a system could and could not deliver given the quality of the data that dental recalls produce.
2. Background and Current Scientific Evidence
Digital twins in health
Proposals for medical digital twins combine mechanistic models of physiology with statistical learning from patient data [8]. Scoping reviews describe a field in which definitions vary and applications are mostly at early stages [11]. Commentaries identify computation, implementation, and regulation as the main obstacles [10] and note that current twins are bespoke solutions that are hard to scale [7]. A formal treatment represents the twin and its physical counterpart as a probabilistic graphical model in which states, observations, and decisions are linked through time, so that standard Bayesian methods apply [6]. A consensus report from the United States National Academies identified verification, validation, and uncertainty quantification as foundational gaps [5].
Digital twins and prediction in implant dentistry
Digital workflows already supply the geometric ingredients of a twin: cone beam computed tomography, intraoral scans, and the design files of surgical guides and prostheses [12, 16]. The dental twin literature is small, as noted above [14, 15]. Prediction models for implant outcomes are more numerous, but their methodological quality has been questioned in general terms that apply here: reporting guidance and risk-of-bias tools exist for prediction models, including those using machine learning [17–19], and calibration in particular is often neglected [20].
Mechanistic models of the implant–bone system
Finite element analysis is the established tool for estimating stress and strain in bone around implants. A recent state-of-the-art review lists its limitations: simplified material properties and interfaces, uncertain loads, and scarce validation [21]. Bone adaptation has been simulated by algorithms in which density changes in response to a mechanical stimulus such as strain energy density, a line of work that began in orthopedics [22, 23] and has been applied to dental implants [24, 25].
Clinical tests of these models are few. One study followed 22 posterior implants in twelve participants with cone beam scans at 3, 15, and 27 months after loading and related bone change to finite element estimates driven by measured occlusal force. Strain energy density in the buccal bone correlated positively with occlusal force and with bone volume loss at 3 and 27 months [26]. That study is close in spirit to the present proposal: it joins patient-specific simulation to longitudinal imaging. It is an analysis of association in a small sample and does not update a model or issue predictions.
What is measured at recall
The observations available to a twin are those of routine care. Marginal bone level on radiographs is the principal measure of peri-implant bone and the basis of most definitions of success [27]. Probing depth and bleeding on probing describe the soft tissue. Resonance frequency analysis measures interface stiffness [28] but requires access to the implant or abutment and is seldom repeated after restoration. Digital occlusal analysis records the distribution and timing of contacts in relative terms; its validity for force has been examined under laboratory conditions [29]. Prosthetic events are recorded as they occur. Each of these measurements carries error, and several are taken at irregular intervals. A model that ingests them must represent that error explicitly.
Statistical tools for dynamic prediction and model calibration
Biostatistics has methods for updating predictions as longitudinal measurements arrive, notably joint models of longitudinal and time-to-event data [30]. Bayesian inference provides the general framework for combining prior information with data and has been introduced to dental researchers through worked examples [31]. In computational science, Bayesian calibration of computer models treats the difference between simulator and reality as a quantity to be estimated [32], and ensemble methods update the state of a dynamical model sequentially as observations arrive [33].
Evaluation of a prediction system rests on discrimination, calibration, and clinical utility. Net benefit across decision thresholds is assessed by decision curve analysis [34]. Sample size for model development can be calculated from the number of parameters and the expected performance [35]. Models deployed in practice face changes in case mix and measurement over time [36], and translation of algorithms into clinical benefit has proved difficult [37].
Credibility and regulation
For computational models used in the evaluation or operation of medical devices, credibility is established through verification, validation, and uncertainty quantification scaled to the risk of the decision the model informs [38–40]. Dental planning software has been cleared in the United States under a product code for image management and processing systems [41]. For software that learns after deployment, the Food and Drug Administration has issued guidance on predetermined change control plans [42]. Patent records identified in the preparatory search concern digital twin updating and patient or surgical twins in general terms [43–45]; they were identified by number and title only.
Summary
The components of an implant twin exist separately: patient-specific geometry, mechanical and bone-adaptation models, repeated clinical measurements, and statistical methods for sequential updating. No system was found that joins them, and the dental twin literature consists largely of prototypes.
3. Research Gap
Four gaps are identified.
First, no implant model is updated longitudinally. Existing patient-specific simulations are run once, at planning [15], or retrospectively for analysis [26].
Second, prediction models for implant complications are static and seldom report calibration or external validation [4, 20].
Third, uncertainty is not quantified. Finite element results are reported as single values although their inputs, especially bone properties and loads, are poorly known [21].
Fourth, mechanistic and statistical approaches have developed apart. Whether a mechanistic model improves prediction beyond what repeated clinical measurements already provide has not been tested.
PubMed searches combining digital twin terms with implants and with longitudinal updating returned the scoping review, the planning-stage model, editorials, and general reviews, and no longitudinally updated implant twin. Engineering and computer science databases were not searched, and work in progress may exist in those literatures or in industry.
4. Research Objective and Central Hypothesis
The objective is to specify, and to describe the validation of, a longitudinal digital twin that updates predictions of implant complications at each recall visit.
Specific aims are:
- To define the state variables, process models, and measurement models of the twin.
- To define the inference procedure by which recall data update patient-level states and parameters, with population-level priors.
- To establish by synthetic experiments which states and parameters can be recovered from data of clinical quality.
- To develop the twin on a retrospective cohort and to validate it temporally and externally.
- To compare it with a static baseline model and with a statistical dynamic model that has no mechanistic component.
The central hypothesis has two parts. The first is that predictions updated with a patient’s accumulating data are better calibrated and more discriminating than predictions from baseline information alone. This is likely to be true of any competent dynamic model and is a minimum requirement. The second is the substantive one: that including a mechanistic model of load and bone response improves prediction beyond a statistical dynamic model given the same data. It would be refuted if the two performed equally, in which case the simpler model should be preferred and the mechanical apparatus regarded as unnecessary for prediction.
5. Scientific and Theoretical Framework
State-space formulation
For each patient, let x_t denote the state at visit t. It contains, for each implant, the marginal bone level, a measure of bone density in the peri-implant region, the stiffness of the bone–implant interface, a soft-tissue inflammatory state, and the integrity of the screw joint and of the prosthesis. Static parameters θ comprise geometry, material properties, and patient characteristics. Inputs u_t are exposures between visits such as maintenance and reported parafunction. The state evolves as
x_(t+1)=f(x_t,θ,u_t)+w_t (1)
and is observed through
y_t=h(x_t,θ)+v_t (2)
where w_t is process noise and v_t is measurement error. After each visit the joint distribution of states and parameters is updated by Bayes’ rule:
p(x_t,θ∣y_(1:t))∝p(y_t∣x_t,θ) p(x_t,θ∣y_(1:t−1)) (3)
This is the formal content of the twin, and it corresponds to the probabilistic graphical model proposed for engineering twins [6].
Process models
The function f has four parts.
The mechanical part maps occlusal load and the current state to the mechanical stimulus in peri-implant bone. A reduced-order model, trained on finite element solutions for the patient’s geometry, returns strain energy density in regions around each implant and the forces on each screw joint. Reduced-order modeling makes repeated evaluation feasible and has been demonstrated for implant stress at the planning stage [15].
The bone part updates density and marginal level in response to the stimulus. In the classical form, the rate of change of density ρ is proportional to the difference between the stimulus S and a reference value k, with a zone of width 2s around the reference in which no change occurs [22, 23]:
dρ/dt=(B (S−(1+s)k),S>(1+s)k0,(1−s)k≤S≤(1+s)kB (S−(1−s)k),S<(1−s)k) (4)
The parameters B, k, and s are uncertain and are given priors.
The biological part represents soft-tissue status as a discrete state (healthy, mucositis, peri-implantitis) with transition intensities that depend on plaque control, history of periodontitis, maintenance, and the current bone level. Marginal bone loss driven by inflammation enters the bone part as an additional term that is independent of the mechanical stimulus.
The technical part gives hazards of screw loosening, veneer chipping, and component fracture as functions of the mechanical demand computed by the reduced-order model and of time in function.
Model discrepancy
No mechanistic model of this system is correct. Following the approach used in Bayesian calibration of computer models [32], the observation is written as
y_t=η(x_t,θ)+δ(z_t)+ε_t (5)
where η is the mechanistic prediction, δ is a discrepancy function of covariates z_t learned from data, and ε_t is measurement error. The discrepancy term keeps the mechanistic parameters from being distorted to fit what the model cannot represent, and its size relative to η measures how much the mechanistic model contributes.
Hierarchical priors
A single patient contributes a handful of observations. Individual parameters cannot be estimated from these alone. Each patient-level parameter is therefore drawn from a population distribution whose own parameters are estimated from the development cohort:
θ_i∼p(θ∣ψ), ψ∼p(ψ) (6)
At a patient’s first visit the prediction rests on the population. As observations accumulate, the posterior moves toward the patient. How quickly it moves is examined in Section 7.
Predictions
For an event E, such as marginal bone loss exceeding a threshold or loosening of a screw, the twin reports the posterior predictive probability over a horizon H:
P(E∈(t,t+H] ( y_(1:t))=∫P(E∣x_t,θ) p(x_t,θ∣y_(1:t)) dx_t dθ (7)
together with a credible interval for continuous quantities such as bone level at the next visit. The interval is part of the output. A prediction without one cannot be checked for coverage.
6. Methodology
Architecture
The system has six layers. The data layer ingests imaging, scans, design files, and structured clinical records and attaches a measurement model to each observation type. The geometry layer segments bone, registers scans, and assembles the patient-specific model. The model layer holds the reduced-order mechanical model and the bone, biological, and technical process models. The inference layer performs the update of equation (3). The prediction layer computes equation (7) and formats output. The audit layer stores every prediction with the model version that produced it and compares predictions with later outcomes.
Observations and measurement models
Table 1 lists the observations and the form of error assumed for each. Error magnitudes are not asserted here. They are estimated from repeated measurements in the development cohort or from published reliability studies identified by a dedicated search.
| Observation | State informed | Measurement model | Main sources of error |
|---|---|---|---|
| Marginal bone level on intraoral radiograph | Bone level, mesial and distal | Gaussian error about true level; bias term for projection | Projection geometry; examiner; buccal and lingual bone unseen |
| Cone beam computed tomography, when clinically indicated | Bone level and volume in three dimensions | Gaussian with artifact-dependent variance | Metal artifact; registration |
| Probing depth and bleeding on probing | Soft-tissue state | Ordinal or binary with misclassification probabilities | Probing force; prosthesis contour |
| Digital occlusal record | Load distribution among contacts | Relative force per contact; total force latent | Sensor properties; patient effort |
| Resonance frequency, when prosthesis is removed | Interface stiffness | Gaussian | Transducer orientation; abutment height |
| Prosthetic events | Joint and prosthesis integrity | Interval-censored event times | Detection only at visits |
| Maintenance and self-reported factors | Inputs | Covariates | Recall and reporting |
Mechanical model
A full finite element model is built for each patient in the development phase, with bone properties assigned from image intensity through a relation that is itself uncertain, and with the prosthesis and implants from design data. A set of solutions over the ranges of uncertain inputs trains the reduced-order model. Agreement between reduced and full models is verified on held-out input combinations. Absolute bite force is not observed in routine care and is treated as a latent patient-level parameter with a population prior; the occlusal record informs only its distribution among contacts.
Inference
For the sequential update, an ensemble method is proposed: a set of samples of states and parameters is propagated between visits by the process models and reweighted or shifted when observations arrive [33]. Population-level parameters are estimated from the development cohort by Markov chain Monte Carlo on a simplified version of the model and then fixed for deployment. The choice of algorithm is secondary to the requirement that posterior distributions be checked against synthetic data for which the truth is known.
Stage 0: synthetic experiments
Before any patient data are used, virtual patients are simulated from the model with known parameters, and observations are generated with realistic error and visit schedules. The inference procedure is applied to these observations. The questions are which parameters are recovered, how many visits are needed, which parameters are confounded with one another, and whether credible intervals achieve their nominal coverage. Parameters that cannot be recovered from data of clinical quality are fixed or merged. This stage decides whether later stages are worth attempting.
Stage 1: development cohort
A retrospective cohort is assembled from centers with digital records: implants with baseline three-dimensional imaging, prosthesis design data, and at least three recall visits with standardized radiographs. Outcomes are marginal bone loss beyond a prespecified threshold by a given visit, diagnosis of peri-implantitis according to the consensus case definition [46], and technical complications. Population priors, discrepancy functions, and hazard parameters are estimated. Missing data are handled within the Bayesian model.
Stage 2: validation
Temporal validation uses later visits of the development centers that were withheld. External validation uses centers that contributed no development data. Three predictors are compared on identical patients and horizons: a static model using baseline variables; a statistical dynamic model, a joint model of longitudinal bone level and event times [30], using the same recall data without mechanics; and the twin. Table 2 lists the metrics.
| Property | Metric | Comparison |
|---|---|---|
| Discrimination | Time-dependent area under the curve | Twin versus static and versus statistical dynamic model |
| Calibration | Calibration slope and intercept; calibration curves by horizon | Each model against observed frequencies |
| Overall accuracy | Brier score; error of predicted bone level | As above |
| Uncertainty | Coverage of 80% and 95% predictive intervals | Nominal versus observed coverage |
| Clinical utility | Net benefit across decision thresholds | Decision curve analysis against treat-all and treat-none |
| Contribution of mechanics | Variance attributed to mechanistic term versus discrepancy | Within the twin |
| Stability | Performance by center, implant system, and period | Detection of dataset shift |
Reporting follows guidance for prediction models that use machine learning [17], and risk of bias is appraised with the corresponding tool [19].
Sample size
For the static comparator, the criterion that limits overfitting gives a minimum sample size from the number of candidate parameters and the anticipated model fit [35]. With ten parameters, an anticipated Cox–Snell R^2 of 0.10, and a target shrinkage of 0.90, the criterion gives about 850 implants; at an outcome proportion of 20% this is about 170 events. These inputs are assumptions chosen for illustration. The twin has more parameters, although most are constrained by priors and by the mechanistic structure, and implants are clustered within patients, so the development cohort would need to be several times larger. The external validation sample is set to give at least 100 events, a figure commonly recommended for validation and to be confirmed by precision calculations once the outcome frequency is known.
Credibility of the mechanistic component
Verification covers mesh convergence of the finite element models and the error of the reduced-order model against them. Validation at the mechanical level uses bench models with strain gauges on bone analogs. Validation at the clinical level is Stage 2. Uncertainty in inputs is propagated to outputs throughout. The rigor required is set by the context of use [38, 39]: a system that informs the recall interval carries less risk than one that would trigger an intervention, and the first context is the one proposed.
Governance
Every prediction is stored with model version and input data. Performance is monitored continuously against outcomes, with predefined limits that trigger review. Updates to population parameters follow a documented change protocol of the kind described in regulatory guidance for learning systems [42]. The clinician sees the prediction, its interval, and the observations that most influenced it, and remains responsible for decisions. Patient data are handled under applicable privacy law, and performance is examined across patient subgroups to detect unequal accuracy.
Ethics
Stage 0 uses simulated data. Stages 1 and 2 require institutional review board approval and data-sharing agreements. A prospective study in which predictions are shown to clinicians would be a separate investigation with its own approval and, in the United States, a determination of device status. No approval has been sought and no data have been accessed.
7. Analytical Development
How quickly can a twin become patient-specific?
Consider the simplest quantity the twin tracks: the rate of marginal bone loss at one implant site, assumed constant. The population prior for the rate has standard deviation τ. Radiographic bone level is measured with error of standard deviation σ at n visits spaced Δ apart. The variance of the rate estimated from the patient’s data alone is that of a regression slope,
Var(r)=(12 σ^2)/(Δ^2 n (n^2−1)) (8)
and the posterior variance after combining with the prior is
Var(r∣y)=(1/(τ^2)+1/(Var(r)))^(−1) (9)
Table 3 evaluates these expressions for annual radiographs with a measurement error of 0.3 mm and a between-site standard deviation of rate of 0.2 mm per year. Both values are assumptions made for illustration; neither is taken from a source verified in this project.
| Number of radiographs | From patient data alone | Posterior with population prior | Reduction from prior |
|---|---|---|---|
| 2 | 0.42 | 0.18 | 10% |
| 3 | 0.21 | 0.15 | 27% |
| 4 | 0.13 | 0.11 | 44% |
| 5 | 0.09 | 0.09 | 57% |
| 6 | 0.07 | 0.07 | 66% |
Under these assumptions, two radiographs a year apart leave the estimate of an individual’s rate almost where the population prior put it. Only after four or five annual radiographs does the patient’s own record dominate. The conclusion depends on the assumed values, but its form is general: with measurements this noisy and this infrequent, early predictions from any twin are population predictions with a personal label. A system that claimed otherwise would be overstating what it knows. The same arithmetic identifies the remedy. Because the variance in equation (8) is proportional to the square of the measurement error, halving that error, for example by standardized projection geometry, is worth more than doubling the number of visits in the early years.
Identifiability of load and stiffness
The mechanical stimulus in bone depends on load and on tissue stiffness. In a linear elastic model, strain is proportional to the ratio of force to modulus, and strain energy density to the square of force divided by modulus. Bone response therefore constrains a combination of the two and cannot determine either. Neither is measured in routine care: absolute bite force is unobserved, and bone modulus is inferred from image intensity through an uncertain relation. In the planning-stage model cited earlier, the modulus of cancellous bone was the most influential of six design variables [15]. The variable to which the mechanical output is most sensitive is thus among those known least well. The twin handles this by carrying wide priors on both and reporting the resulting spread, and the synthetic experiments of Stage 0 determine whether the spread is narrow enough for the mechanical model to inform anything.
When does the mechanistic model earn its place?
Equation (5) splits the systematic part of an observation into a mechanistic prediction and a learned discrepancy. Let
ν=(Var(η))/(Var(η)+Var(δ)) (10)
computed over the validation cohort. If ν is near zero, the mechanistic model explains little and the system is in effect a statistical model with an expensive front end. If ν is substantial and the twin outperforms the statistical dynamic model, the mechanics are contributing. The correlation between simulated strain energy density and observed bone volume change in 22 implants [26] suggests that ν is not zero for load-related bone change in the first years. Whether it remains material once inflammation-driven loss is included is unknown, and biological loss may dominate in the long term.
What the twin should not be asked to do
Rare catastrophic events, such as implant fracture, will have too few instances for calibration. Events driven by factors outside the model, such as trauma or a change in systemic health, cannot be predicted from it. The twin’s legitimate outputs are probabilities for common, gradual outcomes over short horizons, and its legitimate use in the first instance is to rank patients for closer follow-up.
8. Discussion
The proposal takes the term digital twin at its technical meaning and asks what would be required to deserve it in implant dentistry. The answer is a great deal: patient-specific geometry, a mechanical model fast enough to run repeatedly, process models for bone and soft tissue, measurement models for imperfect clinical observations, hierarchical priors, a sequential inference algorithm, and an audit trail. Each exists in some form. Their integration is the contribution, and their integration is also where the risk lies.
Three results from the analysis temper expectations. Personalization is slow, because recall data are sparse and noisy. The main mechanical inputs are weakly identified. And the mechanistic model has to prove that it adds to what a statistical model extracts from the same visits. A reader might conclude that the statistical dynamic model is the sensible product and the twin an over-engineered version of it. That may turn out to be correct, and the protocol is built to find out. The case for the mechanistic component is that it can represent interventions. A statistical model trained on observed courses cannot say what would happen if a cantilever were shortened or an occlusal contact removed, because it has no representation of either. A model with mechanics can, in principle, simulate the change, and decision support of that kind is what distinguishes a twin from a forecast. Whether its simulated counterfactuals are trustworthy is a separate validation problem that outcome prediction alone does not settle.
The broader literature counsels caution. Health digital twins remain largely at the stage of proposals and prototypes [7, 11], and the dental examples are fewer and earlier still [14]. Prediction models frequently perform worse outside the data on which they were built, and poor calibration can make a model harmful even when discrimination looks good [20, 37]. Implant systems, imaging devices, and clinical habits change over time, so that a model fitted to past patients meets a shifted population [36]. The architecture addresses these risks through logging, monitoring, and controlled updating, but none of those measures substitutes for external validation.
There is also the matter of what clinicians would do with the output. A probability of bone loss is useful only if a decision depends on it: a shorter recall interval, an occlusal adjustment, a targeted radiograph. Net benefit analysis [34] makes that dependence explicit by asking whether acting on the prediction does more good than acting on everyone or no one. A twin that is accurate but changes no decision has no clinical value, however elegant.
Within this portfolio, the twin is the natural recipient of measurements proposed in companion papers, including residual mechanical reserve after component failure and vibroacoustic indicators of joint preload. Those are inputs that might, if validated, sharpen the state estimate. They are not prerequisites, and the architecture is specified to work with the observations that routine care already produces.
9. Clinical Significance
If validated, the system would support three decisions: how soon to recall a patient, where to direct radiographic and clinical attention at the next visit, and whether a mechanical modification is likely to reduce risk. It would also give patients a clearer statement of prognosis than a categorical risk label. The immediate practical message is more modest and does not depend on building anything. The analysis in Section 7.1 implies that the precision of radiographic bone-level measurement limits every form of individualized prediction, and that standardizing radiographs is the cheapest way to make a patient’s own record informative.
No clinical use is appropriate before external validation, and a system of this kind would be subject to regulatory requirements for software that informs clinical decisions.
10. Limitations
Nothing has been implemented. The process models are simplified, and the bone adaptation algorithm in particular was developed for a different skeletal site and has known problems of numerical behavior [23]. Biological loss is represented by a coarse state model that ignores microbiology and host response. The numerical illustration rests on assumed values. Routine data are observational, irregular, and subject to informative visit patterns, since patients with problems are seen more often. Segmentation and registration errors propagate into the mechanical model. Retrospective cohorts with baseline three-dimensional imaging, design files, and standardized radiographs may be too few or too selective. The computational and organizational cost may exceed any benefit. The search for prior work did not cover engineering and computer science databases, and the patent records cited were identified by number and title only.
11. Future Validation
Stage 0 is inexpensive and decisive and should be done first. If key parameters prove unidentifiable, the design should be simplified before any clinical data are sought. Stage 1 depends on assembling a multicenter data set, which is the principal practical obstacle. Stage 2 must include centers and implant systems not used in development. Only after these would a prospective study be justified in which predictions are shown to clinicians and their effect on decisions and outcomes is measured. An intermediate and independently useful product is the statistical dynamic model, which could be validated and reported on its own.
12. Conclusion
A digital twin, in the sense of a model updated by data from the system it represents, has not been built for dental implants. An architecture is specified in which a patient-specific mechanical and biological model is updated at each recall by Bayesian data assimilation and returns probabilities of complications with stated uncertainty. Analysis under stated assumptions shows that sparse, noisy recall data limit how quickly predictions can become individual, and that the mechanistic component must demonstrate value beyond statistical updating. The architecture has not been implemented, and no data have been analyzed.
Cite this paper
Jain S, Gupta A. A Longitudinal Digital Twin of the Implant–Bone–Prosthesis System: A Bayesian Data-Assimilation Architecture for Updating Complication Predictions at Recall Visits, With a Protocol for Validation. Working paper. Center for Implant Dentistry; 2026. Available from: https://bayareaimplantdentistry.com/clinician-research-and-publications/longitudinal-implant-digital-twin
References
- Heitz-Mayfield LJA, Heitz F, Lang NP. Implant Disease Risk Assessment IDRA-a tool for preventing peri-implant disease. Clin Oral Implants Res. 2020;31(4):397-403. doi:10.1111/clr.13585 (opens in a new tab). PMID: 32003037 (opens in a new tab).
- Gao X, Li D, Duan Y, Wu L. Risk factors and prediction model of peri-implantitis in post operative periodontitis patients. Am J Transl Res. 2024;16(9):4741-4750. doi:10.62347/THTL1156 (opens in a new tab). PMID: 39398596 (opens in a new tab).
- Alharbi MT, Almutiq MM. Prediction of Dental Implants Using Machine Learning Algorithms. J Healthc Eng. 2022;2022:7307675. doi:10.1155/2022/7307675 (opens in a new tab). PMID: 35769356 (opens in a new tab).
- Wu Z, Yu X, Wang F, Xu C. Application of artificial intelligence in dental implant prognosis: A scoping review. J Dent. 2024;144:104924. doi:10.1016/j.jdent.2024.104924 (opens in a new tab). PMID: 38467177 (opens in a new tab).
- National Academies of Sciences, Engineering, and Medicine. Foundational research gaps and future directions for digital twins. Washington (DC): National Academies Press; 2024.
- Kapteyn MG, Pretorius JVR, Willcox KE. A probabilistic graphical model foundation for enabling predictive digital twins at scale. Nat Comput Sci. 2021;1(5):337-347. doi:10.1038/s43588-021-00069-0 (opens in a new tab). PMID: 38217207 (opens in a new tab).
- Niederer SA, Sacks MS, Girolami M, Willcox K. Scaling digital twins from the artisanal to the industrial. Nat Comput Sci. 2021;1(5):313-320. doi:10.1038/s43588-021-00072-5 (opens in a new tab). PMID: 38217216 (opens in a new tab).
- Corral-Acero J, Margara F, Marciniak M, Rodero C, Loncaric F, Feng Y, et al. The ‘Digital Twin’ to enable the vision of precision cardiology. Eur Heart J. 2020;41(48):4556-4564. doi:10.1093/eurheartj/ehaa159 (opens in a new tab). PMID: 32128588 (opens in a new tab).
- Kamel Boulos MN, Zhang P. Digital Twins: From Personalised Medicine to Precision Public Health. J Pers Med. 2021;11(8). doi:10.3390/jpm11080745 (opens in a new tab). PMID: 34442389 (opens in a new tab).
- Venkatesh KP, Raza MM, Kvedar JC. Health digital twins as tools for precision medicine: Considerations for computation, implementation, and regulation. NPJ Digit Med. 2022;5(1):150. doi:10.1038/s41746-022-00694-7 (opens in a new tab). PMID: 36138125 (opens in a new tab).
- Katsoulakis E, Wang Q, Wu H, Shahriyari L, Fletcher R, Liu J, et al. Digital twins for health: a scoping review. NPJ Digit Med. 2024;7(1):77. doi:10.1038/s41746-024-01073-0 (opens in a new tab). PMID: 38519626 (opens in a new tab).
- Joda T, Lee J, Pala K, Poon J, Jung RE, Gallucci GO. Digital Implant Dentistry: The Past, the Present, the Future. J Periodontal Res. 2026;61(8):877-893. doi:10.1111/jre.70139 (opens in a new tab). PMID: 42403280 (opens in a new tab).
- Roy S, Richert R, Tavares JMRS, Lahoud P. Editorial: Applications of digital twin technology in dentistry. Front Bioeng Biotechnol. 2025;13:1624734. doi:10.3389/fbioe.2025.1624734 (opens in a new tab). PMID: 40567255 (opens in a new tab).
- Duggal I, Tripathi T, Gupta V. Exploring the scope and applications of digital twin technologies in dentistry: a scoping review. Evid Based Dent. 2026;27(2):41. doi:10.1038/s41432-026-01204-4 (opens in a new tab). PMID: 42104107 (opens in a new tab).
- Ahn S, Kim J, Baek S, Kim C, Jang H, Lee S. Toward Digital Twin Development for Implant Placement Planning Using a Parametric Reduced-Order Model. Bioengineering (Basel). 2024;11(1). doi:10.3390/bioengineering11010084 (opens in a new tab). PMID: 38247961 (opens in a new tab).
- Joda T, Balmer M, Jung RE, Ioannidis A. Clinical use of digital applications for diagnostic and treatment planning in prosthodontics: A scoping review. Clin Oral Implants Res. 2024;35(8):782-792. doi:10.1111/clr.14230 (opens in a new tab). PMID: 38140771 (opens in a new tab).
- Collins GS, Moons KGM, Dhiman P, Riley RD, Beam AL, Van Calster B, et al. TRIPOD+AI statement: updated guidance for reporting clinical prediction models that use regression or machine learning methods. BMJ. 2024;385:e078378. doi:10.1136/bmj-2023-078378 (opens in a new tab). PMID: 38626948 (opens in a new tab).
- Wolff RF, Moons KGM, Riley RD, Whiting PF, Westwood M, Collins GS, et al. PROBAST: A Tool to Assess the Risk of Bias and Applicability of Prediction Model Studies. Ann Intern Med. 2019;170(1):51-58. doi:10.7326/M18-1376 (opens in a new tab). PMID: 30596875 (opens in a new tab).
- Moons KGM, Damen JAA, Kaul T, Hooft L, Andaur Navarro C, Dhiman P, et al. PROBAST+AI: an updated quality, risk of bias, and applicability assessment tool for prediction models using regression or artificial intelligence methods. BMJ. 2025;388:e082505. doi:10.1136/bmj-2024-082505 (opens in a new tab). PMID: 40127903 (opens in a new tab).
- Van Calster B, McLernon DJ, van Smeden M, Wynants L, Steyerberg EW. Calibration: the Achilles heel of predictive analytics. BMC Med. 2019;17(1):230. doi:10.1186/s12916-019-1466-7 (opens in a new tab). PMID: 31842878 (opens in a new tab).
- Falcinelli C, Valente F, Vasta M, Traini T. Finite element analysis in implant dentistry: State of the art and future directions. Dent Mater. 2023;39(6):539-556. doi:10.1016/j.dental.2023.04.002 (opens in a new tab). PMID: 37080880 (opens in a new tab).
- Huiskes R, Weinans H, Grootenboer HJ, Dalstra M, Fudala B, Slooff TJ. Adaptive bone-remodeling theory applied to prosthetic-design analysis. J Biomech. 1987;20(11-12):1135-50. doi:10.1016/0021-9290(87)90030-3 (opens in a new tab). PMID: 3429459 (opens in a new tab).
- Weinans H, Huiskes R, Grootenboer HJ. The behavior of adaptive bone-remodeling simulation models. J Biomech. 1992;25(12):1425-41. doi:10.1016/0021-9290(92)90056-7 (opens in a new tab). PMID: 1491020 (opens in a new tab).
- Chou HY, Jagodnik JJ, Müftü S. Predictions of bone remodeling around dental implant systems. J Biomech. 2008;41(6):1365-73. doi:10.1016/j.jbiomech.2008.01.032 (opens in a new tab). PMID: 18394631 (opens in a new tab).
- Lin D, Li Q, Li W, Swain M. Dental implant induced bone remodeling and associated algorithms. J Mech Behav Biomed Mater. 2009;2(5):410-32. doi:10.1016/j.jmbbm.2008.11.007 (opens in a new tab). PMID: 19627848 (opens in a new tab).
- Assoratgoon I, Wan B, Tenkumo T, Sato T, Kawata T, Hardani Putra R, et al. Three-dimensional in vivo and finite element analyses of peri-implant bone remodeling after superstructure placement. J Prosthet Dent. 2025;133(6):1535-1544. doi:10.1016/j.prosdent.2025.01.015 (opens in a new tab). PMID: 39909738 (opens in a new tab).
- De Bruyn H, Vandeweghe S, Ruyffelaert C, Cosyn J, Sennerby L. Radiographic evaluation of modern oral implants with emphasis on crestal bone level and relevance to peri-implant health. Periodontol 2000. 2013;62(1):256-70. doi:10.1111/prd.12004 (opens in a new tab). PMID: 23574471 (opens in a new tab).
- Sennerby L, Meredith N. Implant stability measurements using resonance frequency analysis: biological and biomechanical aspects and clinical implications. Periodontol 2000. 2008;47:51-66. doi:10.1111/j.1600-0757.2008.00267.x (opens in a new tab). PMID: 18412573 (opens in a new tab).
- Cerna M, Ferreira R, Zaror C, Navarro P, Sandoval P. Validity and reliability of the T-Scan(®) III for measuring force under laboratory conditions. J Oral Rehabil. 2015;42(7):544-51. doi:10.1111/joor.12284 (opens in a new tab). PMID: 25727489 (opens in a new tab).
- Rizopoulos D. Dynamic predictions and prospective accuracy in joint models for longitudinal and time-to-event data. Biometrics. 2011;67(3):819-29. doi:10.1111/j.1541-0420.2010.01546.x (opens in a new tab). PMID: 21306352 (opens in a new tab).
- Sorensen E, Pendleton C, Xie XJ. Bayesian Statistics: A Walkthrough with a Simulated Dental Dataset. Int J Oral Maxillofac Implants. 2022;37(6):1095-1099. doi:10.11607/jomi.10210 (opens in a new tab). PMID: 36450014 (opens in a new tab).
- Kennedy MC, O’Hagan A. Bayesian Calibration of Computer Models. Journal of the Royal Statistical Society Series B: Statistical Methodology. 2001;63(3):425-464. doi:10.1111/1467-9868.00294 (opens in a new tab).
- Evensen G. Sequential data assimilation with a nonlinear quasi‐geostrophic model using Monte Carlo methods to forecast error statistics. J. Geophys. Res.. 1994;99(C5):10143-10162. doi:10.1029/94jc00572 (opens in a new tab).
- Vickers AJ, Elkin EB. Decision curve analysis: a novel method for evaluating prediction models. Med Decis Making. 2006;26(6):565-74. doi:10.1177/0272989X06295361 (opens in a new tab). PMID: 17099194 (opens in a new tab).
- Riley RD, Ensor J, Snell KIE, Harrell FE Jr, Martin GP, Reitsma JB, et al. Calculating the sample size required for developing a clinical prediction model. BMJ. 2020;368:m441. doi:10.1136/bmj.m441 (opens in a new tab). PMID: 32188600 (opens in a new tab).
- Finlayson SG, Subbaswamy A, Singh K, Bowers J, Kupke A, Zittrain J, et al. The Clinician and Dataset Shift in Artificial Intelligence. N Engl J Med. 2021;385(3):283-286. doi:10.1056/NEJMc2104626 (opens in a new tab). PMID: 34260843 (opens in a new tab).
- Kelly CJ, Karthikesalingam A, Suleyman M, Corrado G, King D. Key challenges for delivering clinical impact with artificial intelligence. BMC Med. 2019;17(1):195. doi:10.1186/s12916-019-1426-2 (opens in a new tab). PMID: 31665002 (opens in a new tab).
- American Society of Mechanical Engineers. Assessing credibility of computational modeling through verification and validation: application to medical devices. ASME V&V 40-2018. New York: ASME; 2018.
- U.S. Food and Drug Administration. Assessing the credibility of computational modeling and simulation in medical device submissions: guidance for industry and Food and Drug Administration staff. Silver Spring (MD): FDA; 2023.
- Viceconti M, Pappalardo F, Rodriguez B, Horner M, Bischoff J, Musuamba Tshinanu F. In silico trials: Verification, validation and uncertainty quantification of predictive models used in the regulatory evaluation of biomedical products. Methods. 2021;185:120-127. doi:10.1016/j.ymeth.2020.01.011 (opens in a new tab). PMID: 31991193 (opens in a new tab).
- U.S. Food and Drug Administration. Product classification: product code LLZ (medical image management and processing system), 21 CFR 892.2050; 510(k) summaries K152078 (3Shape Implant Studio) and K103723 (SICAT Implant). Silver Spring (MD): FDA.
- U.S. Food and Drug Administration. Marketing submission recommendations for a predetermined change control plan for artificial intelligence-enabled device software functions: guidance for industry and Food and Drug Administration staff. Fed Regist. 2024 Dec 4;89:96259.
- Digital twin updating. United States patent US 11,529,105 B2.
- Surgery digital twin. United States patent application publication US 2019/0087544 A1.
- Method and system for generating a patient digital twin. United States patent application publication US 2019/0005200 A1.
- Berglundh T, Armitage G, Araujo MG, Avila-Ortiz G, Blanco J, Camargo PM, et al. Peri-implant diseases and conditions: Consensus report of workgroup 4 of the 2017 World Workshop on the Classification of Periodontal and Peri-Implant Diseases and Conditions. J Clin Periodontol. 2018;45 Suppl 20:S286-S291. doi:10.1111/jcpe.12957 (opens in a new tab). PMID: 29926491 (opens in a new tab).

